187P Multiple Exposures8 Shoot subsequent exposures.X When [On:Func/Ctrl] is set, the merged multiple-exposureimage will be displayed.With Live View shooting, the multiple-exposure images mergedso far will be displayed. By pressing the <B> button, you candisplay only the Live View image.After you shoot the set number of exposures, multiple-exposureshooting will be canceled. With continuous shooting, after youfinish shooting the set number of exposures while holding downthe shutter button, the shooting will stop.With multiple exposures, the more exposures there are, the morenoticeable the noise, irregular colors, and banding will be. Also, as noiseincreases with higher ISO speeds, shooting at low ISO speeds isrecommended.If [Additive] is set, the image processing after taking the multiple exposureswill take time. (The access lamp will light up for longer than usual.)If you perform Live View shooting while [On:Func/Ctrl] and [Additive] areboth set, the Live View function will stop automatically when the multipleexposure shooting ends.In step 8, the brightness and noise of the multiple-exposure imagedisplayed during Live View shooting will be different from the finalmultiple-exposure image recorded.If [On:ContShtng] is set, let go of the shutter button after shooting theset number of exposures.If the power switch is set to <2> or the battery is replaced after you setmultiple exposure settings, multiple-exposure shooting will be canceled.If you switch the shooting mode to <w1/w2/w3> while shooting,multiple-exposure shooting will end.When multiple exposure is set or during multiple-exposure shooting, youcannot use the grayed out functions in the camera menu.If you connect the camera to a personal computer or printer, multiple-exposure cannot be set.When [On:Func/Ctrl] is set, you can press the <x> button during shootingto view the multiple exposures taken so far or delete the last singleexposure (p.189).COPY
