3323 Custom Function SettingsViewfinder info. during exposureYou can enable or disable the viewfinder information displayed during theexposure.OFF: DisableON: EnableThe viewfinder information will be displayed even during exposure. Thisis convenient when you want to check the exposure setting, number ofpossible shots, etc., during continuous shooting.LCD panel illumination during BulbYou can set the LCD panel illumination behavior during Bulb exposures,such as whether it stays on during the exposure, and whether it turns off orstays on when the <U> button is pressed.OFF: OffWhen the Bulb exposure starts, the LCD panel illumination turns off.Pressing the <U> button during a Bulb exposure illuminates the LCDpanel for 6 sec.ON: On during BulbThe LCD panel illumination remains on until the Bulb exposure ends.This is convenient when you are taking a Bulb exposure in low light andwant to check the exposure time.Recording card, image size settingWhen you press the <H> button to select the card or set the image size,you can select to do it with the rear LCD panel or with the menu screen.Rear LCD panelYou can press the <H> button and turn the <6> or <5> dial whilelooking at the rear LCD panel.LCD monitorWhen you press the <H> button, the [Record func+card/folder sel.]or [Img type/size] screen will appear. Pressing the button togglesbetween the two screens.When the shooting mode is set to “Bulb”, the viewfinder information will notbe displayed even if [Enable] is set.COPY
