413 Setting the Date, Time, and Zone4 Set the date and time.Turn the <5> dial to select thenumber.Press <0> so <r> is displayed.Turn the <5> dial to select thedesired setting, then press <0>(Returns to <s>).5 Set the daylight saving time.Set it if necessary.Turn the <5> dial to select [Y].Press <0> so <r> is displayed.Turn the <5> dial to select [Z], thenpress <0>.When the daylight saving time is setto [Z], the time set in step 4 willadvance by 1 hour. If [Y] is set, thedaylight saving time will be canceledand the time will go back by 1 hour.6 Exit the setting.Turn the <5> dial to select [OK],then press <0>.X The Date/Time/Zone will be set andthe menu will reappear.The menu setting procedure is explained on pages 53-54.The date/time that was set will start from when you press <0> in step 6.In step 3, the time displayed on the upper right is the time differencecompared with Coordinated Universal Time (UTC). If you do not see yourtime zone, set the time zone while referring to the difference with UTC.To sync the time between two cameras with [Sync time betweencameras] (Multi Camera Time Sync Function), use the [Communicationsettings] menu. For details, refer to the separate Wired LAN InstructionManual.COPY
