102Due to the lens characteristics, the four corners of the picture might lookdarker. This is called lens light fall-off or drop in peripheral illumination.The default setting is [Enable].1 Select [Peripheral illumin.correct.]. Under the [1] tab, select[Peripheral illumin. correct.], thenpress <0>.2 Set the correction setting. On the screen, check that theattached lens’ [Correction dataavailable] is displayed. If [Correction data not available] isdisplayed, see “About the LensCorrection Data” on the next page. Select [Enable], then press <0>.3 Take the picture. The image will be recorded with thecorrected peripheral illumination.3 Lens Peripheral Illumination CorrectionWithout correction With correctionwww.devicemanuals.euSet the correction setting.www.devicemanuals.euSet the correction setting.On the screen, check that thewww.devicemanuals.euOn the screen, check that theattached lens’ [www.devicemanuals.euattached lens’ [Correction datawww.devicemanuals.euCorrection dataavailablewww.devicemanuals.euavailable] is displayed.www.devicemanuals.eu] is displayed.Correction data not availablewww.devicemanuals.euCorrection data not availabledisplayed, see “About the Lenswww.devicemanuals.eudisplayed, see “About the LensCorrection Data” on the next page.www.devicemanuals.euCorrection Data” on the next page.www.devicemanuals.eu Select [www.devicemanuals.euSelect [3www.devicemanuals.eu3 Take the picture.www.devicemanuals.euTake the picture.www.devicemanuals.euwww.devicemanuals.eu
