37When a lens hood is attached to the lens, it can reduce image ghostingor flare by blocking stray light. The lens hood can also protect the frontof the lens from raindrops, snow, dust, etc.Although the lens hood is usually sold separately, certain lens kitconfigurations have it included.Attach the lens hood. Turn the lens hood as shown by thearrow until it attaches securely.1 Align the red index marks on thelens hood and lens. Align the red index marks <o> onthe lens hood and on the front of thelens.2 Attach the lens hood. Turn the lens hood as shown by thearrow until the hood’s < > markaligns with the lens’ <o> mark.Using the Lens HoodAttaching a Lens Hood without Index MarksAttaching a Lens Hood with Index Marks To detach the lens hood, grasp the base of the hood when turning it.Grasping the hood’s edges when turning it may deform the hood. If the lens hood is not properly attached, the hood might appear in thepicture with the image periphery looking dark. Before using the built-in flash, detach the lens hood. Otherwise, the lenshood may partially block the flash and cause a darkened area in thepicture.The hood can be mounted in reverse on the lens for storage.www.devicemanuals.euTurn the lens hood as shown by thewww.devicemanuals.euTurn the lens hood as shown by thearrow until it attaches securely.www.devicemanuals.euarrow until it attaches securely.Align the red index marks on thewww.devicemanuals.euAlign the red index marks on thelens hood and lens.www.devicemanuals.eulens hood and lens.www.devicemanuals.euwww.devicemanuals.euwith Index Markswww.devicemanuals.euwith Index Markswww.devicemanuals.euwww.devicemanuals.euwww.devicemanuals.eu
