118In this mode, you set both the shutter speed and aperture as desired. To determinethe exposure, refer to the exposure level indicator in the viewfinder or use acommercially-available exposure meter. This method is called manual exposure.* <a> stands for Manual.1 Set the Mode Dial to <a>.2 Set the ISO speed (p.88).3 Set the shutter speed and aperture. To set the shutter speed, turn the<6> dial. To set the aperture, turn the <5> dial.If the aperture cannot be set, press the<R> button below the <5> dial(0), then turn the <5> dial.4 Focus the subject. Press the shutter button halfway. The exposure setting will be displayed inthe viewfinder and on the LCD panel. The exposure level mark <s> indicateshow far the current exposure level is fromthe standard exposure level.5 Set the exposure and take thepicture. Check the exposure level and set thedesired shutter speed and aperture.a: Manual ExposureExposure level markStandard exposure index If the [2 Auto Lighting Optimizer] (p.101) is set to anything other than[Disable], the image may still look bright even if a darker exposure hasbeen set. If ISO Auto is set, the ISO speed setting will change to suit the shutterspeed and aperture to obtain a standard exposure. Therefore, you maynot obtain the desired exposure effect.www.devicemanuals.euSet the shutter speed and aperture.www.devicemanuals.euSet the shutter speed and aperture.To set the shutter speed, turn thewww.devicemanuals.euTo set the shutter speed, turn theTo set the aperture, turn the <www.devicemanuals.euTo set the aperture, turn the <If the aperture cannot be set, press thewww.devicemanuals.euIf the aperture cannot be set, press theRwww.devicemanuals.euR> button below the <www.devicemanuals.eu> button below the <0www.devicemanuals.eu0), then turn the <www.devicemanuals.eu), then turn the <www.devicemanuals.euFocus the subject.www.devicemanuals.euFocus the subject.www.devicemanuals.eu Press the shutter button halfway.www.devicemanuals.euPress the shutter button halfway.www.devicemanuals.euwww.devicemanuals.eu
