84You can select the pixel count and the image quality. There are eightJPEG image quality settings: 73/83/74/84/7a/8a/b/c.There are three RAW image quality settings: 1, 41, 61 (p.86)1 Select [Quality]. Under the [1] tab, select [Quality],then press <0>.2 Select the image-recording quality. To select a RAW setting, turn the<6> dial. To select a JPEG setting,press the <U> key. On the upper right, the “***M(megapixels) **** x ****” numberindicates the recorded pixel count,and [***] is the number of possibleshots (displayed up to 999). Press <0> to set it.Image-recording Quality Setting Examples* If [–] is set for both RAW and JPEG, 73 will be set.3 Setting the Image-recording Quality73 only61+741+731 onlywww.devicemanuals.eu> dial. To select a JPEG setting,www.devicemanuals.eu> dial. To select a JPEG setting,> key.www.devicemanuals.eu> key.On the upper right, the “www.devicemanuals.euOn the upper right, the “(megapixels)www.devicemanuals.eu(megapixels) **** x ****www.devicemanuals.eu**** x ****indicates the recorded pixel count,www.devicemanuals.euindicates the recorded pixel count,and [www.devicemanuals.euand [***www.devicemanuals.eu***] is the number of possiblewww.devicemanuals.eu] is the number of possibleshots (displayed up to 999).www.devicemanuals.eushots (displayed up to 999).Press <www.devicemanuals.euPress <Image-recording Quality Setting Exampleswww.devicemanuals.euImage-recording Quality Setting Exampleswww.devicemanuals.eu
