135The built-in flash and external Speedlite settings can be set with thecamera’s menu. You can use those menu options for the externalSpeedlite only if the attached EX-series Speedlite are compatible withthem.The setting procedure is the same as setting a camera menu function.Select [Flash control]. Under the [1] tab, select [Flashcontrol], then press <0>. The flash control screen will appear. Normally, set this to [Enable]. If [Disable] is set, both the built-inflash and external Speedlite willnot fire. This is useful when you onlywant to use the flash’s AF-assistbeam.The [Built-in flash func. setting] and [External flash func. setting]menus can set the functions listed on the next page. The functionsdisplayed under [External flash func. setting] will vary depending onthe Speedlite model. Select [Built-in flash func. setting]or [External flash func. setting]. The flash functions will be displayed.The functions not dimmed can beselected and set.3 Setting the FlashN[Flash firing][Built-in flash func. setting] and [External flash func. setting]www.devicemanuals.euNormally, set this to [www.devicemanuals.euNormally, set this to [If [Disable] is set, both the built-inwww.devicemanuals.euIf [Disable] is set, both the built-inflash and external Speedlite willwww.devicemanuals.euflash and external Speedlite willnot fire.www.devicemanuals.eunot fire.Built-in flash func. settingwww.devicemanuals.euBuilt-in flash func. settingmenus can set the functions listedwww.devicemanuals.eumenus can set the functions listedwww.devicemanuals.eu[Built-in flash func. setting] and [External flash func. setting]www.devicemanuals.eu[Built-in flash func. setting] and [External flash func. setting]
