123456789Back NextPreviousTOP8-13Before Using theMachineDocument and PaperSending andReceivingCopyingPrintingSystem ManagerSettingsMaintenanceTroubleshootingAppendixIndexTable of ContentsMEMORY FULLDescription The machine is full of jobs.Action Print, send, or delete any documents stored inmemory.Action Divide the document stack into a few parts andtry again one by one.Action Send the document with low resolution.Description The number of TX/RX jobs that can be stored inmemory reached the maximum.Action The maximum numbers of jobs that can bestored in memory are as follows (Based on thecondition that the other party sends the fax byFAXPHONE L90 with ITU-T Standard Chart No.1,mode); Up to 256 jobs for sending and receiving.Wait for the machine to send any documentsin memory. Also print, send, or delete anydocuments stored in memory.NOT AVAILABLEDescription You pressed the one-touch speed dialing keythat has already been registered, when you areregistering group dialing.Description You pressed the group dialing that has alreadybeen registered, when you are registering a one-touch speed dialing key.Action Register the one-touch speed dialing key orcoded speed dialing that is not used.Description The number of entered recipients forbroadcasting by the numeric keys has alreadyreached the upper limit (16).Action Enter not more than 16 recipients forbroadcasting by the numeric keys.Description You have specified the group dialing when theline is off the hook or [Hook] key is pressed.Action Specify the recipient other than group dialing.Description A group dialing key is used for Relay TX.Action Enter the recipients except group dialing keys.
