| 
123456789Back NextPreviousTOP8-25Before Using theMachineDocument and PaperSending andReceivingCopyingPrintingSystem ManagerSettingsMaintenanceTroubleshootingAppendixIndexTable of ContentsAre documents stored in memory, leaving little orno memory available?Print, send, or delete any documents stored inmemory.Has an error occurred during reception?Check the LCD for an error message. (See “LCDMessages,” on p. 8-10.)Print an Activity Report and check for an error. (See“ACTIVITY REPORT,” on p. 9-22.)Is paper loaded in the machine?Make sure paper is loaded in the machine. (See “SetUp the Machine,” in the Starter Guide.)Is the telephone cable connected properly?Make sure the cable is connected properly. (See“Before FAX Setting,” in the Starter Guide.)QAQAAQAQANo automatic switching between telephone and fax calls.Is the machine set to switch automatically betweentelephone and fax calls?For the machine to switch between fax and telephonecalls automatically, the receive mode must be set to, , or . If you have set, confirm that an answering machine isconnected to the machine and that it is turned onwith an outgoing message properly recorded. (See“Basic Receiving Method,” on p. 3-22.)Are documents stored in memory, leaving little orno memory available?Print, send, or delete any documents stored inmemory.Has an error occurred during reception?Check the LCD for an error message. (See “LCDMessages,” on p. 8-10.)Print an Activity Report and check for an error. (See“ACTIVITY REPORT,” on p. 9-22.)QAQAQAA |
