123456789Back NextPreviousTOP8-28Before Using theMachineDocument and PaperSending andReceivingCopyingPrintingSystem ManagerSettingsMaintenanceTroubleshootingAppendixIndexTable of ContentsPart of the documents you receive are cut off.Are the slide guides of the paper feeder set to thesize of the paper?Adjust the guides of the paper feeder to the size ofthe paper.Have you specified the correct paper size for thepaper feeder?Specify the correct paper size for the paper feeder.Is the toner low or unevenly distributed?Redistribute the toner inside the toner cartridge. Ifthe problem persists, replace the toner cartridge. (See“Replacing the Toner Cartridge,” on p. 7-8.)Is the printing method for received documents setto ?If you want to print a received document withoutcutting off the end, set the printing method to or . (See “Received Image Reduction,” onp. 3-29.)QAQAQAQACannot receive using Error Correction Mode (ECM).Does the sender’s machine support ECM?If the sender’s machine does not support ECM, thedocument is received in normal mode without errorchecking.Receiving of documents is too slow.Is the resolution of the sender’s machine sethigher?Contact to the sender and make sure the resolution ofthe sender’s machine has been set properly.QAQA
