RefreshUpdates and displays the contents of Printers: on the Canon IJ Network Tool screen to thelatest information.Important• To change the printer's network settings using IJ Network Tool, it must be connected via a LAN.• If No Driver is displayed for the name, associate the port with the printer.When Printer Driver Is Not Associated with Port• If Not Found is displayed for the status, check the followings:• The wireless router is turned on.• When using wired LAN, the LAN cable is connected properly.• If the printer on a network is not detected, make sure the printer is turned on and select Refresh.It may take several minutes to detect printers. If the printer is not yet detected, connect themachine and the computer with a USB cable and select Refresh.• If the printer is being used from another computer, a screen is displayed informing you of thiscondition.Note• This item has the same function as Update in the Canon IJ Network Tool screen.Network InformationDisplays the Network Information screen to check the network settings of the printer and thecomputer.Network Information ScreenDisplay Warning AutomaticallyEnables or disables automatic display of the instruction screen.When this menu is selected, the instruction screen is displayed if one or more ports areunavailable for printing.3. Settings menuConfiguration...Displays the Configuration screen to configure settings of the selected printer.Configuration ScreenNote• This item has the same function as Configuration... in the Canon IJ Network Tool screen.Enable switch printer function when printer is usedWhen you cannot use your printer, you can use the same one on the network instead. When youenable this function and you cannot use your printer, the screen to make sure whether you startsearching the same printer as yours is displayed. Follow the message on the screen.270
