Important• Large items (such as A4 size photos) that cannot beplaced away from the edges/arrow (alignment mark) ofthe platen may be saved as PDF files. To save in a for-mat other than PDF, scan by specifying the data for-mat.Placing Multiple Items:Allow 0.4 inch (1 cm) or more space between the edges (di-agonally striped area) of the platen and items, and betweenitems. Portions placed on the diagonally striped area cannotbe scanned.more than 0.4 inch (1 cm)Note• You can place up to 12 items.• You can place up to four items when the Compressscanned images upon transfer checkbox is selectedin the Settings dialog box of IJ Scan Utility.• With network connection, items may not be scannedcorrectly when five or more items are placed. In thatcase, reduce the number of items placed on the platento four or less, then scan again.• Positions of slanted items (10 degrees or less) are cor-rected automatically.Important• Refer to "Loading Originals" for your model fromHome of the Online Manual for details on the por-tions in which items cannot be scanned.Placing Documents (ADF (Auto Document Feeder))Important• Do not leave thick items on the platen when scanning from the ADF. May result in paper jam.• Place and align documents of the same size when scanning two or more documents.• Refer to "Originals You Can Load" for your model from Home of the Online Manual for details onsupported document sizes when scanning from the ADF.1. Open the document tray.637
