Also if you select Custom..., the Custom Paper Size dialog box opens and allows you to specify anyvertical and horizontal dimensions for the paper size.OrientationSelects the printing orientation.If the application used to create your document has a similar function, select the same orientation thatyou selected in that application.PortraitPrints the document so that its top and bottom positions are unchanged relative to the paper feeddirection. This is the default setting.LandscapePrints the document by rotating it 90 degrees relative to the paper feed direction.You can change the rotation direction by going to the Maintenance tab, opening the CustomSettings dialog box, and then using Rotate 90 degrees left when orientation is [Landscape]check box.To rotate the document 90 degrees to the left when printing, select the Rotate 90 degrees leftwhen orientation is [Landscape] check box.Print QualitySelects your desired printing quality.Select one of the following to set the print quality level that is appropriate for the purpose.To set the print quality level individually, click the Main tab, and for Print Quality, select Custom. TheSet... becomes enabled. Click Set... to open the Custom dialog box, and then specify the desiredsettings.HighGives priority to print quality over printing speed.StandardPrints with average speed and quality.DraftThis setting is appropriate for test printing.Paper SourceShows the source from which paper is supplied.Rear TrayPaper is always supplied from the rear tray.CopiesSpecifies the number of copies you want to print. You can specify a value from 1 to 999.Important• When the application software that you used to create the document has the same function,specify the settings on the printer driver. However, if the print results are not acceptable, specify thefunction settings on the application software.Always Print with Current SettingsPrints documents with the current settings starting from the next print execution.When you select this function and then close the printer driver setup window, the information that youset on the Quick Setup, Main, and Page Setup tabs are saved and printing with the same settings ispossible starting from the next print execution.415
