7-10 Receiving Faxes Chapter 7❏ If you do not hang up after pressing the two-digit ID code, theunit beeps intermittently for a few seconds after you receive thedocument. (You can turn the beeping off by disabling theOFFHOOK ALARM in the USER SETTINGS menu. See pages15-3 and 15-4 for details.)If you have an answering machine connected to your LASER CLASS2060P that can carry out remote-control operations (controlling youranswering machine from a remote telephone), the security code for thisfunction may be the same as the two-digit ID code described above. If so,make sure you change the LASER CLASS 2060P two-digit ID code tomake it distinct from the answering machine’s security code. See pages15-9 and 15-11 for details on changing the code (REMOTE RX ID setting).Receiving Faxes Automatically: FAX ONLY MODEWhen the LASER CLASS 2060P is set up for a dedicated line, set FAXONLY MODE to automatically receive documents whenever a call comesover the fax line.❏ The LASER CLASS 2060P assumes all incoming calls are from faxmachines sending documents. It receives the documentsautomatically and disconnects all voice calls.❏ In FAX ONLY MODE, you can control whether or not the LASERCLASS 2060P rings when it receives a fax call. To set this optionfrom the LASER CLASS 2060P operation panel, see pages 15-9and 15-11 (INCOMING RING setting).Using an Answering Machine: ANS.MACHINE MODEConnecting an answering machine to the LASER CLASS 2060P allowsyou to receive faxes and phone messages while you are out of the office.For instructions on connecting an answering machine to the LASERCLASS 2060P, see “Connecting an Extension Phone or AnsweringMachine” on page 2-20.N
