9-6 Setting Up and Using Polling Chapter 9Setting Up Polling SendingThis section shows you how to set up your fax to store and hold adocument until it is polled by another fax to send it.Before You Can Be Polled to SendBefore you set up your polling box, contact the parties who are going topoll your fax to receive documents and confirm the following points:❏ If you are using an ITU-T password for the polling box, they mustalso know this password. This password setting is optional.❏ Your TX PASSWORD must match the ITU-T password attached whenthe other party calls you. Confirm that the TX PASSWORD on yourfax matches the ITU-T password attached when the other party callsyou.❏ If the other party’s fax does not support ITU-T subaddress/passwordtransactions, do not set the password.Setting Up a Polling BoxBefore you can use polling sending, you must create a polling box withthe POLLING BOX of the Menu System. The polling box holds thedocument in the memory until the other party prompts (polls) your fax tosend the document.1. Open One-Touch Speed Dial panel.2. Press Data Registration.R E G I S T R A T I O N1 . D A T A R E G I S T R A T I O NDataRegistration
