13-20 Frequently Asked Questions Chapter 13After Clearing a Paper JamAfter removing the jammed paper, follow these steps:1. Install the FX-3 toner cartridge back in the unit (See page 2-34).2. Move the paper release lever back to its original position (toward thefront).3. Close the front cover to reset the unit.4. Load paper in the paper cassette or the multi-purpose tray.❏ If you are experiencing repeated paper jams, it may be due to thepaper you are using:• Tap the paper on a flat surface before stacking it in the papercassette/the multi-purpose tray.• Check that the paper you are using and your printingenvironment are within the specifications of the unit. SeeAppendix, “Specifications.”❏ Make sure you have removed any scraps of paper from inside theLASER CLASS 2060P. Not doing so will cause paper to jam again.N
