1-12 Introducing the LASER CLASS 2060P Chapter 1Safety InstructionsRead these safety instructions thoroughly before using yourLASER CLASS 2060P, and keep them handy in case you need to refer tothem later.Except as specifically described in this user’s guide, do not attempt toservice the LASER CLASS 2060P yourself. Never attempt to disassemblethe unit: opening and removing its interior covers will expose you todangerous voltages and other risks. For all service, contact your localauthorized Canon Facsimile Dealer.❏ Always follow all warnings and instructions marked on theLASER CLASS 2060P.❏ Use the LASER CLASS 2060P only on a sturdy, stable, level surface. Ifthe unit falls, it could be seriously damaged.❏ Do not use the LASER CLASS 2060P near water. If you spill liquid onor into the unit, unplug it immediately and call your local authorizedCanon Facsimile Dealer.❏ The back of the LASER CLASS 2060P includes slots and openings forventilation. To keep the LASER CLASS 2060P from overheating(which can cause it to operate abnormally and create a fire risk), takecare not to block or cover these openings. Do not operate the unit on abed, sofa, rug, or other similar soft surface, or near a radiator or otherheat source. Do not place the LASER CLASS 2060P in a closet orcabinet or on shelves unless adequate ventilation is available. See“Choosing a Location for Your LASER CLASS 2060P” on page 2-3 forguidelines on how much space the unit needs for ventilation.❏ Operate the LASER CLASS 2060P only from the type of power sourceindicated on the unit’s label. If you are unsure of the type of poweravailable from your wall outlets, contact your local power company.❏ Make sure the total amperage used by all devices plugged into thewall outlet does not exceed the ampere rating of the outlet's circuitbreaker.❏ Do not allow anything to rest on the power cord and do not place theLASER CLASS 2060P where the cord will be walked on. Make surethe cord is not knotted or kinked.C
