Settings Menu3-423Printer Settings MenuIMPORTANTPlease note that if the print position is adjusted to place the digits of the copynumbers outside the printable area, the portion outside the printable area is notprinted.NOTE• This function is only available if 'Copy Set Numbering' is set to [On].• This setting is only effective for the print position of copy numbers. When adjustingprint position (other than the copy numbers), perform the setting with 'Offset ShortEdge/Offset Long Edge'. (See p. 3-24 to p. 3-25.)PersonalityAuto* , PS, PCL, Imaging, and PDF1.5This setting enables the machine to process data received from the hostcomputer in the specified data format. Setting the 'Personality' to [Auto] makes themachine determine the type of data received from the host on a job-by-job basis.If you are printing from applications on a computer, we recommend that you usethe [Auto] setting.NOTE• If you find that the machine does not correctly switch to the appropriate personalitywhen 'Personality' is set to [Auto], change the setting manually to match the datayou are sending from the host computer.• This function is not available when printing in the UFR II Printer.Mode PriorityNone* , PS, PCL, and PDF1.5This setting determines which personality should be used if a job is receivedwithout a specified command language or Direct Print data. 'Mode Priority' is usedwhen 'Personality' is set to [Auto].NoneThis does not specify a preferred personality. If a job is received without aspecified command language or Direct Print data, the current personality is used.The default setting is [None].PSThis assigns priority to the PS personality.PCLThis assigns priority to the PCL personality.
