Imaging Settings 3-793Printer Settings MenuZoomOff * , AutoThis setting enlarges or reduces the size of an image to match the printable areaof the paper size specified.If [Auto] is selected, the size of the image is automatically enlarged or reduced tomatch the printable area of the specified paper size. If the size of the image islarger than the printable area, it is automatically reduced. If the size of the imageis smaller than the printable area, it is automatically enlarged.IMPORTANT• Even if [Off] is selected, the image size is automatically reduced if it is larger thanthe printable area of the specified paper size.• If [Auto] is selected, Tags contained in TIFF data that specify the data's printablearea will be ignored.NOTE• If there is blank space in the top, bottom, left, and right edges when using thissetting, use the 'Print Position' setting in combination with this setting to adjust theprint position.• This setting uses the same ratio for both the length and width to enlarge or reducethe size of the image.Print PositionAuto* , Center, and Top LeftThis setting specifies the print position for the image.If [Auto] is selected, the image is printed in the specified position of the paper ifthe print position for the TIFF data is specified. If the print position is not specified,the image is printed in the center of the paper.If [Center] is selected, the image is printed in the center of the paper regardless ofwhether the print position of the TIFF data is specified.If [Top Left] is selected, the image is printed in the top left of the paper regardlessof whether the print position of the TIFF data is specified.IMPORTANTAs the JPEG file format does not contain print position information, JPEG imagesare printed in the center of the paper even if [Auto] is selected.
