Printing Problems 6-196TroubleshootingThe specified color of thin lines or filled-in patterns do not print or disappear.Cause 1 The combination of the color or pattern cannot be reproduced correctly.Remedy 1 Adjust the color in the software application you are using and print the dataagain.Remedy 2 Change the pattern in the software application you are using and print the dataagain.Remedy 3 If 'Resolution' in the printer driver is set to [1200 dpi], press [Dark] to adjust thedensity with 'Density Fine Adjustment', and print the data again.NOTEYou can also perform the same procedure from the touch panel display. (See "DensityFine Adjustment," on p. 3-18.)Remedy 4 Set 'Resolution' in the printer driver to [600 dpi] and print the data again.NOTEYou can also perform the same procedure from the touch panel display. (See"Resolution," on p. 3-18.)Cause 2 The color looks different due to the halftone pattern.Remedy 1 Change the density of the color and print the data again.Remedy 2 Change the direction of the paper and print the data again.Remedy 3 Set 'Halftones' in the printer driver to [Error Diffusion] and print the data again.(See the Help function on the printer driver.)NOTEYou can also perform the same procedure from the touch panel display. (See"Halftones," on p. 3-46, p. 3-59, p. 3-75, p. 3-81, p. 3-96.)The halftone pattern does not print in the correct (specified) color.Cause The machine's dither pattern is interfering with the halftone pattern in the printdata.Remedy 1 Remove the halftone pattern in the software application you are using and printthe data again.Remedy 2 Set 'Halftones' in the printer driver to [Error Diffusion] and print the data again.(See the Help function on the printer driver.)
