Settings Menu3-183Printer Settings Menu■ Toner SaveOn, Off *This setting enables you to set the Toner Save function. Toner Save uses lesstoner to print documents and may result in longer toner life.NOTEIf [On] is selected for 'Toner Save', very light or finely detailed images may not beprinted clearly.■ Density Fine Adjustment-2 to +2; 0 *This setting enables you to increase the character and line density for clearerprinting of fine lines and small characters. Pressing [Dark] makes the charactersand lines darker, pressing [Light] makes them lighter. This setting has 5 levels youcan adjust, with level '0' (middle level) as the default setting.NOTE• This function is only available for Color imageRUNNER C2550 if the optional1200dpi Print Expansion Board is attached.• This setting is only available if 'Resolution' is set to [1200 dpi].■ Resolution1200 dpi, 600 dpi *This setting specifies the resolution for printing.Resolution is expressed in units of dpi (dots per inch), indicating the number ofdots in one inch. The higher the value, the greater the resolution, allowing finerexpression of detail.If [1200 dpi] is selected, characters and lines can be finely printed.If [600 dpi] is selected, you can perform printing suited to general documents andtables.NOTE• This function is only available for Color imageRUNNER C2550 if the optional1200dpi Print Expansion Board is attached.• This setting can only be applied to jobs in UFR II, PS, and PDF1.5 mode.• [1200 dpi] cannot be applied in Imaging mode.• When printing on large scale paper, set 'Resolution' to [600 dpi]. If [1200 dpi] isselected, there will not be enough memory necessary to process printing andprinting will not be possible.
