Canon LASER CLASS 700 Series Network Manual

Also see for Laser Class 700 Series: Facsimile guide Specification Datasheet Reference guide Setup guide

Contents

Canon LASER CLASS 700 Series Network Manual Manual pdf 21 page image

TCP/IP Network Setup Procedures2-2Using a TCP/IP Network (Windows/UNIX)2TCP/IP Network Setup ProceduresTo use a TCP/IP network, it is necessary to perform the following procedures.IMPORTANT• It is recommended that the Network Administrator perform steps 1 and 2 above.• If you are printing using a TCP/IP network, you can use the following print applications:- LPD (Line Printer Daemon)- FTP (File Transfer Protocol)- Raw (Windows 2000/XP only)- IPP (Internet Printing Protocol) (Windows 95/98/Me/2000/XP only)• This machine does not come with printer driver software that can be used for each UNIXplatform.• If you are configuring the basic protocol settings for the first time, use the operation panelon your LASER CLASS 700 Series machine.1 Connect the network cable. (See Chapter 1, “Before You Start Using ThisMachine,” in the PCL Printer Guide.)Connect the network cables in accordance to the directions specified in the PCL Printer Guide.2 Specify the protocol settings. (See “Specifying Protocol Settings,” on p. 2-3.)Specify the machine’s protocol settings using one of the following methods:• The machine’s operation panel (Data Registration menu)• NetSpot (Canon software provided with the optional Network Kit III)• A web browser (Remote UI)• ARP/PING commands• An FTP Client3 Specify the computer settings for printing. (See “Setting Up a Computer forPrinting,” on p. 2-22.)Connect each computer you want to use for printing to a TCP/IP network, and install the printer driversoftware.