Canon LASER CLASS 700 Series Network Manual

Also see for Laser Class 700 Series: Facsimile guide Specification Datasheet Reference guide Setup guide

Contents

Canon LASER CLASS 700 Series Network Manual Manual pdf 72 page image

Protocol Settings 3-9Using a NetWare Network (Windows)3Protocol SettingsYou can specify the machine’s protocol settings on your computer using software.The following software programs can be used to specify the network protocolsettings for your machine.• NetSpot (Canon software provided with the optional Network Kit III)• Remote UI• An FTP clientIMPORTANT• Before you enter the IP address of your machine, contact your Network Administrator toallocate your IP address. Enter the correct IP address to avoid network problems.• In order to connect to a NetWare network, install the printer driver, or set up the printer’slocation, the machine’s MAC address is necessary. To check the MAC address from theprinter’s operation panel, follow the procedure below to make a test print.1. Press [PRT.Message] ➞ [Go] on the operation panel to take the printer offline.2. Press [Menu] until appears.3. Press [Item] until appears ➞ press [Enter/Cancel].• Before you perform the following operations in the next section, make sure that themachine is connected to a power source, and connected to the network.NOTEIf you change the IP address from the Remote UI, the change will not be reflected on thedisplay of the machine. You can confirm the change of the IP address by selecting from the NETWORK SETTINGS menu, or by printing the User’sData List.Using NetSpotInstead of using the operation panel of your machine, you can install NetSpot fromthe CD-ROM provided with the optional Network Kit III, and use it to specify theprotocol settings on the computer you are using.For instructions on how to install NetSpot and how to specify the protocol settingsusing NetSpot, see the NetSpot Quick Start Guide.NOTEThe NetSpot Quick Start Guide is an online manual included on the accompanyingCD-ROM provided with the optional Network Kit III. You can use Adobe Acrobat Readerto display and printout the guide for your convenience.