Protocol Settings3-10Using a NetWare Network (Windows)3Using a Web Browser (Remote UI)Instead of using the NetSpot, you can use a web browser (Remote UI) to specifythe protocol settings. For detailed procedure, see “Using a Web Browser (RemoteUI),” on p. 2-14.NOTETo specify the protocol settings using Remote UI from NetWare computers, you canselect Frame type. There are four frame types: Ethernet 802.2, Ethernet 802.3, EthernetII, and Ethernet SNAP.1 Start the web browser ➞ enter the URL below in [Location] or[Address] ➞ press [ENTER] on the keyboard.2 Select [Administrator Mode] ➞ click [OK].❑ Under [Device Manager] in the left column of the screen, click [Network].❑ Under the Protocols heading, click [Edit] at the right of the TCP/IP protocol box.❑ Specify the setting method for allocating the IP address of your machine.3 Click [OK].Using an FTP ClientYou can use an FTP Client to specify the protocol settings. For detailed procedure,see “Using an FTP Client,” on p. 2-20.1 Start up the MS-DOS prompt or the Command prompt.2 Execute the following command.ftp ❑ Enter “root” as the user name.❑ Execute the following command to download the config (configuration) file.get config❑ Edit the downloaded config file using Notepad (or similar program).❑ Execute the following command to upload the config file.put config CONFIG❑ To confirm the settings, execute the following command to reset the printserver.get reset
