Specifying Protocol Settings2-14Using a TCP/IP Network (Windows/UNIX)2Using a Web Browser (Remote UI)Instead of using the operation panel of your machine, or NetSpot, you can use aweb browser (Remote UI) to specify the protocol settings.NOTEIf you change the IP address from the Remote UI, the change will not be reflected on thedisplay of your machine. You can confirm the change of the IP address by selecting from the NETWORK SETTINGS menu, or by printing the User’sData List.1 Start the web browser ➞ enter the URL below in [Location] or[Address] ➞ press [ENTER] on the keyboard.http:///Input Example: http://192.168.203.115/IMPORTANT• Make sure you are using Netscape Navigator/Communicator 4.04 or later, orInternet Explorer 4.01 SP1 or later for your web browser.• You cannot set this machine’s protocol settings through Netscape Communicator4.08 with Turbolinux 4.0. You have to use a different version or web browser.• If you are using a connection via a proxy server, follow these directions: (Thesettings may differ depending on the network environment.)- When configuring your web browser to use the proxy server, add the IP addressof the machine to “Exception” (the address not using the proxy server).- Set up the web browser to accept cookies.• If more than one Remote UI is running at the same time, only the last settingspecified will be valid. It is recommended that only one Remote UI run at a time.
