Setting Up a Computer for Printing4-4Using a NetBIOS Network (Windows 95/98/Me)4Installing the Printer DriverTo print from a computer, you must install a printer driver. (See Chapter 1, “BeforeYou Start Using This Machine,” in the PCL Driver Guide.) During the installationprocedure, select [Local printer]. Do not select [Network printer].The port selection can be changed after installation. You can select any port, suchas [LPT1].Printer’s Location SettingTo set up the printer’s location, follow the procedure below.1 Install the NetBIOS/NetBEUI Port Monitor Utility on theCD-ROM provided with the optional Network Kit III.❑ Insert the CD-ROM supplied with the optional Network Kit III into the CD-ROMdrive.❑ Double-click the [My Computer] icon.❑ Right click the CD-ROM drive icon ➞ click [Open] on the pop-up menu.❑ Double-click the [Portmon] folder.❑ Double-click the [Setup.exe] icon.The install program starts.❑ Follow the on screen instructions to complete the installation of theNetBIOS/NetBEUI Port Monitor Utility software.NOTEDepending on your system environment, the CD-ROM menu may be automaticallydisplayed after you insert the CD-ROM into the CD-ROM drive. In this case, click[End] ➞ proceed to step 2.2 Open the printer’s properties dialog box.❑ On the taskbar, click [Start] ➞ point to [Settings] ➞ click [Printers].❑ Right click the printer icon you want to use for printing.
