Canon LASER CLASS 730i User Manual

Contents

Canon LASER CLASS 730i User Manual Manual pdf 113 page image

12-4 Troubleshooting Chapter 12 Paper curls.1. Remove the printed page after 30 to 60 seconds.The paper may curl if you use thin paper and print images that use a large quantity of ink such asphotographs or pictures.Leave the printed page in the paper output tray for 30 to 60 seconds and remove when the ink has dried.2. Is intensity set too high?The paper may curl or rub if intensity is set too high in the printer driver. In the [Properties] dialog box,on the Main tab, click [Manual] in Color Adjustment, then click [Set]. In the [Manual Color Adjustment]dialog box, reduce the intensity with the Intensity slider.3. Are you using thin paper?The paper may curl if you use thin paper and print images that use a large quantity of ink such asphotographs or pictures with intense colors. Use thicker paper such as high resolution paper or glossyphoto paper ( p. 3-2).4. Was the paper already curled before loading?Uncurl the paper and reload. Meaningless characters and symbols are printing.If this problem only occurs when printing a specific document.Open and edit the document and try printing again. If this does not work, there may be a problem withthe application. Contact the application’s manufacturer. White streaks appear on the printout.1. Print the nozzle check pattern ( Maintaining the printhead, p. 11-3).2. Are you printing on coated paper?In the [Properties] dialog box, on the Main tab, click [High] in Print Quality. Printout is rubbed or stained.1. Is the paper thickness lever set correctly?When you print documents that contain large quantities of ink such as documents with a lot of detail,the paper may curl and rub. Move the paper thickness lever to the right ( p. 3-5).2. Does the paper stack exceed the paper limit mark (ssss|) or tab, or exceed the capacity of themulti-purpose tray?If so, reduce the amount of paper.3. Are you printing outside the printable area?Change the margin settings in the application to keep the document within the recommendedprintable area.4. Is intensity set too high?The paper may curl or rub if intensity is set too high in the printer driver.In the [Properties] dialog box, on the Main tab, click [Manual] in Color Adjustment, then click [Set]. Inthe [Manual Color Adjustment] dialog box, reduce the intensity with the Intensity slider.5. Are you using recommended print media?For recommended print media, see p. 3-1.6. Clean the machine’s interior.If the machine’s interior is dirty with ink or there is a build-up of paper dust, your printout may containink stains. Clean the machine ( p. 11-7).7. Are you printing on the wrong side of the paper?Some papers have a right side for printing. Turn the paper over and try printing again. There are alsotypes of paper such as Photo Paper Pro that can only be printed on one side.PPPPPPPPP