Chapter 13 Machine settings 13-1Chapter13 Machine settings Printing a list to check the current settingsBefore changing any settings, you can print the USER’S DATA LIST to check the current settingsof your machine. For details, see p. 10-5. Accessing the machine settingsFollow this procedure to change a setting:1 Refer to the lists on the following pages to find the setting you want to change.2 If there is a reference for thesetting q, refer to that page fordetails. If not, at the top of thelist, note under which functionkey w and menu e the setting islocated.3 Press [Copy], [Scan], [PhotoPrint], or [Fax]depending under whichfunction key w the setting islocated.4 Press [Menu].5 Use [2222] or [3333] to select the menu e under which the setting is located.6 Press [Set].• You have now accessed the settings in the list.7 Use [2222] or [3333] to select the setting you want.8 Press [Set].9 Follow these guidelines to scroll through and register settings:• Use [2222] or [3333] to scroll through settings.• To register a setting or access sub-settings, press [Set].• To return to a previous level, press [Menu].10 When you have finished, press [Stop/Reset].Fax ModelMenu: SPECIAL COPY Function key: [Copy]Name Description Setting Details1. 2 on 1 Copies two pages on one page (letter- or A4-size only). — p. 5-42. BORDERLESS COPY Copies without any borders (letter, 4” × 6”, 5” × 7”, orA4-size only).— p. 5-53. IMAGE REPEAT Prints multiple copies of an image on a single sheet. — p. 5-6AUTO Automatically selects the number of repetitions. —MANUAL Manually selects the number of repetitions.VERTICAL Selects the number of vertical repetitions. 1/2/3/4HORIZONTAL Selects the number of horizontal repetitions. 1/2/3/44. MIRROR IMAGE Prints a mirror image of the original. — p. 5-85. ENTIRE IMAGE Prints the original image to fit the selected print mediasize.— p. 5-9e w qExample:13Machine settings
