Chapter 9 Receiving faxes 9-59Receiving faxes10 Press [Set].11 Use [2222] or [3333] to select the ring pattern that your telephone company assigned toyour fax number.• Select from the following:– – – – – 12 Press [Set].13 Press [Stop/Reset]. Receiving faxes manually: MANUAL MODE Choose this mode if:• you only have one telephone line for both fax and telephone use.• you receive mainly voice calls and sometimes faxes. You will need to:• set ( p. 9-1).• connect a telephone to your machine ( Set-Up Sheet). When you receive a fax call: The machine will ring. Pick up the handset and if you hear abeep, press [Start] on the machine to receive the fax. If you are far from your machine, dial 25(the remote receiving ID) on your telephone and hang up. When you receive a voice call: The machine will ring. Pick up the handset to answer the call.NOTE• You can customize remote receiving by enabling/disabling it, or by changing the remote receiving ID( , p. 13-5).• If you have an answering machine connected to your machine that can carry out remote-controloperations (controlling your answering machine from a remote telephone), the security code for thisfunction may be the same as the remote receiving ID. If so, make sure you change the machine’s remotereceiving ID to make it distinct from the answering machine’s security code ( , p. 13-5).D R P D : S E L E C T F A XD O U B L E R I N G
