[Use IPv6]Select the check box to enable IPv6 on the machine. When not using IPv6, clear the check box.[Use Stateless Address]Select the check box when using a stateless address. When not using a stateless address, clear the check box.[Use Manual Address]When you want to manually enter an IPv6 address, select the check box and enter the IP address, prefixlength, and default router address in the corresponding text boxes.[IP Address]Enter an IPv6 address. You cannot enter an address that starts with "ff" (or multicast address), the address of"0000::0000" (all zeros), or an address that starts with "0:0:0:0:0:ffff" or "0:0:0:0:0:0."[Prefix Length]Enter a number that indicates how many bits are available for the network address.[Default Router Address]Specify the IPv6 address of the default router as necessary. You cannot enter an address that starts with "ff"(or multicast address), the address of "0000::0000" (all zeros), or an address that starts with "0:0:0:0:0:ffff" or"0:0:0:0:0:0."[Use DHCPv6]Select the check box when using a stateful address. When not using DHCPv6, clear the check box.6 Click [OK].7 Perform a hard reset.● Click [Device Control], select [Hard Reset], and then click [Execute].Network194
