➠ The settings are enabled after the hard reset is performed.Using the operation panel● You can also enable or disable LPD print, RAW print, and IPP print from the setting menu of the operationpanel.LPD Settings(P. 380)RAW Settings(P. 380)IPP Print(P. 381)● WSD settings can also be accessed from the setting menu of the operation panel. WSD(P. 381)Setup procedures on your computerAfter the setting in the machine is completed, you may need to configure settings or install applications on yourcomputer as well. Configure settings in your computer as necessary.● Configuring printer portsPrinting errors can occur when the IP address of the machine has been changed, or when a printer has beenadded via the Windows printer folder. These errors are typically caused by incorrect printer port settings. Forexample, an incorrect port number or port type may have been specified in the computer. To fix this type ofproblem, configure the printer port settings by following the procedure for changing the standard TCP/IPport described in the "Printer Driver Installation Guide".● Setting up WSD network devices on Windows Vista/7/8Install the printer driver by following the procedure for installation with the WSD port described in the"Printer Driver Installation Guide".● Enabling IPP/IPPSInstall the printer drivers by specifying the IPP port. Enabling IPP/IPPS(P. 203)LINKSSetting Up Print Server(P. 212)Network202
