Starting Remote UI0X7U-04WTo operate remotely, you need to input the IP address of the machine into a Web browser and start the Remote UI.Check the IP address set to the machine in advance ( Network Status Print(P. 446) ). If you have any questions, askyour Network Administrator.1 Start the Web browser.2 Enter "http://(the IP address of the machine)/" in the address field, and press the[ENTER] key.● If you want to use an IPv6 address, enclose the IPv6 address with brackets (example: http://[fe80::2e9e:fcff:fe4e:dbce]/).If using a DNS server● You can enter "." instead of "IP address of the machine"(example: http://my_printer.example.com).If a security alert is displayed● A security alert may be displayed when the Remote UI communication is encrypted ( Using TLS forEncrypted Communications(P. 294) ). When certificate settings or TLS settings have no errors, continuebrowsing the Web site.3 Log on to the Remote UI.When the Department ID Management is disabledSelect [Management Mode] or [General User Mode].[Management Mode]You can perform all the Remote UI operations and settings. Enter the System Manager password in[Password].Using Remote UI333
