You can print on the back side of printed paper. Flatten any curls on the printed paper and insert it into themulti-purpose tray ( Loading Paper in the Multi-Purpose Tray(P. 44) ), with the side to print face up(previously printed side face down).● When you want to print on the back side of the paper that is already printed, set to<2nd Side> in the setting menu of the operation panel. Manual 2-Sided (MP)(P. 458)● Load one sheet of paper each time you print.● You can use only the paper printed with this machine.● You cannot print on the side that has previously been printed on.Loading a Custom Size PaperTo load custom size paper or other paper whose size is not found in the paper size markings on the paper drawer, usethe following procedure.1 Pull out the paper drawer until it stops, and remove it while lifting the front side.2 Slide the paper guides apart.● Press the lock release lever to slide the paper guides outward.3 Load the paper so that the edge of the paper stack is aligned against the front side ofthe paper drawer.● Place the paper stack with the print side face down.● Fan the paper stack well, and tap it on a flat surface to align the edges.Basic Operations41
