(Use Community Name 1)SNMP_COMMUNITY1_ACCESS(MIB Access Permission)RW (Read/Write), RO (Read Only) ROSNMP_COMMUNITY1_NAME(Community Name 1)Up to 32 alphanumericcharacters publicSNMP_COMMUNITY2_ENB(Use Community Name 2)ON, OFF OFFSNMP_COMMUNITY2_ACCESS(MIB Access Permission)RW (Read/Write), RO (Read Only) ROSNMP_COMMUNITY2_NAME(Community Name 2)Up to 32 alphanumericcharacters public2SNMP_V3_ENB(Use SNMPv3) ON, OFF OFFSNMP_GET_PRT_MNG_INFO(Obtain Printer Management Information from Host)ON, OFF OFFSPOOLER Menu (Spool Settings)Item Name Setting Value Factory Default SettingSPOOL_ENB(Use Spooler) ON, OFF OFFSTART TIMER Menu (Waiting Time for Connection at Startup)Item Name Setting Value Factory Default SettingSTRT_DELAY_TIME(Waiting Time for Connection at Startup) 0 to 300 (sec.) 0RUI Menu (Remote UI Settings)Item Name Setting Value Factory Default SettingRUI_ENB(Use Remote UI) ON, OFF ON8 Enter "put name> CONFIG" and press the [ENTER] key.● Specify the edited file name in name> (example: put Setting.txt CONFIG).➠ The setting file is uploaded.Appendix613
