11-21TroubleshootngGeneral ProblemsThe machine has no power.Is the power cord plugged in securely?Check that the power cord s securely plugged nto the machne and nto thewall outlet. If the machne s plugged nto a power strp, make sure the powerstrp s plugged n and turned on.Is the power cord supplying power?Use a dfferent power cord, or test the cord for contnuty usng a voltmeter.Is the main power switch turned on?Turn on the man power swtch.The Error indicator flashes.Does the machine feed paper correctly, or is there paper in the papercassette or multi-purpose tray?Clear the paper jam, or load paper n the paper cassette or mult-purpose tray.(For nstructons on clearng paper jam, See “Clearng Jams,” on p. 11-2. Fornstructons on loadng paper, see “Set Up the Machne,” n the Starter Gude.)If the machne has no paper jam, or paper s loaded n the paper cassette ormult-purpose tray, turn off the man power swtch and wat for more than 10seconds, then turn t on agan. If the problem s fxed, the Error ndcator wll turnoff, and the LCD wll return to the standby mode. If the Alarm ndcator remansflashng, unplug the machne, and unplug the machne, and contact your localauthorzed Canon dealer.Nothing appears in the LCD.Is the power cord plugged in securely?Check that the power cord s securely plugged nto the machne and nto thewall outlet. If the machne s plugged nto a power strp, make sure the powerstrp s plugged n and turned on.
