136 Wi-Fi Functions[Search for Access Points] method. Refer also to the router’s instruc-tion manual.1 [WPS: Button] methodPress and hold the WPS button on the wireless router.• Depending on the router, the amount of time required may differ.• Make sure the router’s WPS function is activated.[WPS: PIN Code] methodFrom a computer or similar device connected to the wireless router,use the Web browser to open the router’s WPS settings screen. Afterthe 8-digit PIN code appears on the camcorder’s screen, enter it intoyour router’s WPS settings screen.2 Within 2 minutes, touch [OK] on the camcorder’s screen.• The camcorder will connect to the wireless router.• You can touch [Stop] and then [OK] to interrupt the Wi-Fi ProtectedSetup while it is in progress.• After the connection is established, continue using the function youwere previously using. For details, refer to the procedure inViewingand Changing Wi-Fi Settings (A 139),Sharing Your RecordingsUsing Web Services (A 130) orPlayback on a Computer (A 133)as necessary.Searching for Access PointsThe camcorder will automatically detect access points in the vicinity.After you select the desired access point, you simply enter the pass-word (encryption key) to connect the camcorder.To enter text for the various settings, use the virtual keyboard (A 137).1 Note the access point’s network name (SSID) and encryption key.2 When the detected access points appear, touch the desiredaccess point and then touch [OK].You can touch [Í] and [Î] to go through the detected access points.3 In the field for encryption key, enter the encryption key and thentouch [OK].If the access point selected in step 2 did not have a [C] icon, this stepis not necessary.COPYDownloaded From VideoCamera-Manual.com Manuals
