Canon Legria HF R47 Instruction Manual

Also see for LEGRIA HF R406: Instruction manual Quick guide

Contents

150 Additional Information[m Reset]: File numbers will restart from 100-0001 every time yourecord on a memory that has been initialized.[n Continuous]: File numbers will continue from the number followingthat of the last file recorded with the camcorder.• If the memory card you insert already contains a file with a larger num-ber, a new file will be assigned a number one higher than that of the lastfile on the memory card.• We recommend using the [n Continuous] setting.• Folder names, on the other hand, appear in a format such as“101_0501”. The first three digits indicate the folder number and the lastfour digits indicate the month and day (May 1, for the example folderabove). In the same example, a recording with a file number of“101-0107” is saved in the folder DCIM\101_0501 with a file name of“MVI_0107.MP4” (for MP4 movies) or “IMG_0107.JPG” (for photos).• Folders can contain up to 500 files (MP4 movies and photos combined)and a new folder is created every time a folder exceeds this number.• The first three digits of the file number range from 100 to 999 and thelast four digits range from 0001 to 9900. File numbers are automaticallyassigned consecutive numbers.[Auto Power Off]: In order to save power when the camcorder is poweredby a battery pack, it will automatically shut off if left without any operationfor 3 minutes.• Approximately 30 seconds before the camcorder shuts off, [Auto PowerOff] will appear. Operating any of the camcorder’s controls while themessage is displayed will prevent the camcorder from shutting off.[Power On Using LCD Panel]: If set to [Enable], opening the LCD panelturns the camcorder on while closing the LCD panel turns it off. Set to[Off] to deactivate this feature. In either case, you can still use .[Firmware]: You can verify the current version of the camcorder’s firm-ware, which is the software that controls the camcorder. This menu optionis usually unavailable.[Certification Logo Display]: This displays select certification logos thatapply to this camcorder.• The certification logos apply to Australia and New Zealand only.[Reset All]: Resets all of the camcorder’s settings.COPYDownloaded From VideoCamera-Manual.com Manuals