Canon Legria HF R47 Instruction Manual

Also see for LEGRIA HF R406: Instruction manual Quick guide

Contents

158 Additional Informationappears on the screen.- The camcorder cannot communicate with the battery pack attached so the remaining batterycharge cannot be displayed.lights up in red.- A memory card error occurred. Turn off the camcorder. Remove and reinsert the memorycard. Initialize the memory card if the display does not change back to normal.- The memory card is full. Replace the memory card or delete some recordings (A 55, 57) tofree some space on the memory card.Even after stopping recording, the ACCESS indicator does not go off.- The scene is being recorded in the memory. This is not a malfunction.The red ON/OFF (CHG) indicator flashes rapidly ( one flash at 0.5-secondintervals).- The temperature of the battery pack is outside its operating range (approximately 0 – 40 °C).Remove the battery pack, warm it or let it cool down, as necessary, and try charging it again.- Charge the battery pack in temperatures between approximately 0 °C and 40 °C.- The battery pack is damaged. Use a different battery pack.- Charging has stopped because the compact power adapter or the battery pack is faulty. Con-sult a Canon Service Center.Picture and SoundA rattling can be heard from the camcorder.- If it cannot be heard during camera mode, then the rattling is due to the movement of theinternal lens fixture. This is not a malfunction.The screen appears too dark.- The LCD screen was dimmed. Change the > > [LCD Backlight] setting to[Normal] or [Bright].Screen displays turn on and off repeatedly.- The battery pack is exhausted. Replace or charge the battery pack.- Remove the battery pack and reattach it correctly.Abnormal characters appear on the screen and the camcorder does not operate properly.- Disconnect the power source and reconnect it after a short time. If the problem still persists,remove the battery pack and disconnect all other power sources from the camcorder. Then,reset all the camcorder’s settings to default values (A 148).Video noise appears on screen.- Keep a distance between the camcorder and devices that emit strong electromagnetic fields(plasma TVs, cellular phones, etc.).COPYDownloaded From VideoCamera-Manual.com Manuals