Canon Legria HF R47 Instruction Manual

Also see for LEGRIA HF R406: Instruction manual Quick guide

Contents

164 Additional InformationCharge the battery pack- Battery pack is exhausted. Charge the battery pack.Check the memory card- Cannot access the memory card. Check the memory card and make sure it is inserted cor-rectly.- A memory card error occurred. The camcorder cannot record or display the image. Try remov-ing and reinserting the memory card, or use a different memory card.- You inserted a MultiMedia Card (MMC) into the camcorder. Use a recommended memory card(A 25).- If after the message disappears, appears in red, perform the following: Turn off the cam-corder and remove and reinsert the memory card. If turns back to green you can resumerecording/playback. If the problem persists, save your recordings (A 108) and initialize thememory card (A 31).Check whether the lens cover is open- Slide the lens cover switch down.Do not disconnect the power source. Do not disconnect the USB cable unless you first usethe computer to safely end the connection.- When the camcorder is in mode and is connected to the computer with the suppliedUSB cable, the camcorder cannot be operated. Disconnecting the USB cable or power sourcewhile this message appears may result in permanent loss of the recordings in the camcorder.Use the computer’s Safely Remove Hardware function to end the connection and disconnectthe USB cable before using the camcorder.File name error- The folder and file numbers have reached their maximum value. Set > q> [FileNumbering] to [Reset] and delete all the MP4 movies (A 56) and photos (A 57) on thememory card or initialize it (A 31).Initialize only using the camcorder- There is a problem with the file system that prevents accessing the selected memory. Initializethe memory with this camcorder (A 31).LCD Screen has been dimmed Use the [LCD Backlight] setting to change the brightness- Change the > > [LCD Backlight] setting to [Normal] or [Bright].May not be possible to record movies on this memory card- You may not be able to record movies on a memory card without a Speed Class rating or withone rated SD Speed Class 2. Replace the memory card with one rated SD Speed Class 4, 6 or10.Mem. Card Number of scenes already at maximum- The memory card already contains the maximum number of AVCHD scenes (3,999 scenes);no further scenes can be copied onto the memory card. Delete some scenes (A 55) to freesome space.COPYDownloaded From VideoCamera-Manual.com Manuals