Canon MF515 Series User Manual

Scanning Using an Application0Y9U-05AYou can scan documents from applications such as image-processing or word-processing software. The scanned image is directly loaded in the application,allowing you to edit or process the image immediately. The following procedurevaries depending on the application.● The application must be compatible with TWAIN or WIA*. For more information, see the instruction manualfor your application.* TWAIN is a standard for connecting image input devices, such as scanners, with computers. WIA is a function that is anintegrated standard in Windows.1 Place the document(s). Placing Documents(P. 46)● The second or subsequent documents may not be scanned, or an error message may be displayeddepending on the application. In such a case, place and scan one document at a time.● When is set to , you must tap in theHome screen to bring the machine online. Auto Online for Remote Scan(P. 711)2 From the application, select the start scan command.● The procedure for selecting the start scan command varies depending on the application. For moreinformation, see the instruction manual for your application.3 Select the scanner driver for the machine.● Select ScanGear MF or WIA. If you select ScanGear MF, you can configure advanced scan settings.4 Configure the scan settings as necessary.● For more information about ScanGear MF scan settings, see Configuring Scan Settings in SimpleMode(P. 314) or Configuring Scan Settings in Advanced Mode(P. 317) .5 Click [Scan].➠ Scanning of the document starts.Using the Machine as a Scanner311