Canon MF515 Series User Manual

Connecting to a Network0Y9U-073When connecting the machine to a wired or wireless local area network (LAN), you need to set an IP address unique tothe selected network. Select "wired" or "wireless" depending on your communication environment and networkingdevices. For specific IP address settings, contact your Internet service provider or Network Administrator.● If the machine is connected to an unsecured network, your personal information might be leaked to a thirdparty.● The machine cannot connect to both wired and wireless LANs at the same time.● The machine does not come with a LAN cable or router. Have them ready as necessary.● For more information about your networking devices, see the instruction manuals for the devices or contactyour manufacturer.◼ Before You StartFollow these steps to connect the machine to a network.Check your computer settings.● Make sure that the computer is correctly connected to the network. For moreinformation, see the instruction manuals for the devices you are using, or contact thedevice manufacturers.● Make sure that the network settings have been completed on the computer. If thenetwork has not been set up properly, you will not be able to use the machine on thenetwork, even if you perform the rest of the procedure below.● Depending on the network, you may need to change settings for the communicationmethod (half-duplex/full-duplex) or the Ethernet type (10BASE-T/100BASE-TX/1000BASE-T) ( Configuring Ethernet Settings(P. 484) ). For more information,contact your Internet service provider or Network Administrator.● To check the MAC address of the machine.Viewing the MAC Address for Wired LAN(P. 446)Viewing the MAC Address and Information for Wireless LAN(P. 446)Network414