Canon MF515 Series User Manual

◼ [Scan] TabConfigure the settings that are applied when you scan a document by usingan application, and the settings for ScanGear MF operations.[Scan without Using ScanGear's Window]When you scan the document by using an OCR software or other application, the ScanGear MF screen maynot be displayed. In such a case, the document is scanned with the setting of the application applied.However, if the application does not have the following settings, enable them here so that these settings areapplied for scanning.[Color Mode (Text and Table)]If the application settings are specified to scan documents in color, those settings are replaced anddocuments are scanned with the ScanGear MF color mode set to [Color Mode (Text and Table)].[Text Enhanced]If the application settings are specified to scan documents in black and white, those settings are replacedand documents are scanned with the ScanGear MF color mode set to [Text Enhanced].[Automatically Quit ScanGear after Scanning]The [ScanGear MF] screen automatically closes after scanning is complete. The screen may automaticallyclose with some applications regardless of this setting.◼ [Color Settings] TabConfigure advanced color and brightness settings, such as color matchingand gamma correction.[Color Correction]Select the color correction method.[Recommended]Color tone is vividly reproduced on a computer display. This setting is recommended for most colorcorrections.[Color Matching]Using the Machine as a Scanner326