100EEditingAV IN/OUTOUTPUTAUDIOLRYou can add sound to the original sound on a pre-recorded tape from audiodevices (AUDIO IN) or with the internal or external microphone (MIC. IN). Theoriginal sound will not be erased. For best results, add sound to tapes thathave been recorded with this camcorder in SP mode with 12-bit sound. Ifthere are non-recorded portions on the tape, or portions recorded in a modeother than SP mode, or with 16-bit or 12-bit 4-channel sound, dubbing willstop. If your tape has not been recorded in SP mode with 12-bit sound, werecommend dubbing your original tape onto a blank tape using the MVX2i’sanalog line-in function, then dubbing audio onto the new tape. Makeabsolutely sure to set the audio mode of the new tape to 12-bit and therecording mode to SP.To connect other audio devices:Notes:• Do not use the yellow video terminal.• The AV terminal doesn’t put out any video, so connect the S-videoterminals and check your TV, or check the LCD or the viewfinder as youadd new sound. Always check the new sound with the speaker.To connect an external microphone:STV-250NStereo Video Cable An audio device(i. e. CD player): Signal flowAudio Dubbing
