164EAdditionalInformationTroubleshootingRefer to this checklist first if you have any problems with your camcorder.Possible explanations are given for each problem on the list — turn to thepage numbers in parentheses for more information.Make sure that the camcorder is properly connected if you are using it with aTV or VCR. Consult your dealer or service outlet if problems persist.Recording/PlaybackCause and/or what to do about it• The camcorder is not set to theappropriate mode ( 18, 30).• The cassette is not loaded or is setfor erasure prevention ( 16-17).• The cassette has reached the end.• The power source is not properlyconnected, or the battery pack isexhausted or not properly attached( 11-15, 158).• The function cannot be used inthat recording program ( 59).• The camcorder was in record pausemode for more than about 5minutes ( 18, 111, 175).• The battery pack is exhausted( 12-15, 158).• The battery pack’s power isexhausted. Recharge or change toa new battery pack ( 12-15).• The cassette is not loaded or is setfor erasure prevention ( 16-17).• The cassette has reached the end.• The camcorder is malfunctioning.Remove and then replace powersource.• The camcorder is not set to theappropriate mode ( 18, 30).• You are attempting to play back orrecord copyright protected material( 92).• The video heads are badlycontaminated ( 161).Problem? Nothing happens when I pressthe buttons.? The camcorder turned itself off.? The cassette compartmentstopped mid-operation whileloading/unloading a cassette.? The start/stop button does notwork.? The mark flashes red in thedisplay during charging theflash.? There is no picture in thedisplay.? There is a blank blue screen inthe display.