88EUsing the FullRange of FeaturesReturning to a Pre-Marked PositionUse the wireless controller to mark a point on a tape that you want to returnto following playback.1. Press the ZERO SET MEMORY button on the wirelesscontroller during playback at a point you want to return tolater.• The time code is replaced by a tape counter that is set to zero with the indication.• Press the ZERO SET MEMORY button once more to cancel the zero setmemory.2. When you have finished playback, fast forward or rewindthe tape. The tape stops automatically when it reaches thezero set position.• RTN1 or `RTN appears in the display.• The tape counter with  indication disappears from the display and thetime code reappears.Notes:• The zero set memory may not function correctly where there is a breakbetween recordings on the tape.• You can also use zero set memory to mark a position on a tape in TAPECAMERA mode. When you then play back the tape, pressing rewind willtake you back to the pre-marked position.• If you remove the tape while the zero set memory is set, the memory iscancelled and the tape counter reverts to time code.• The camcorder remembers your setting even if you turn it off and back onagain or move the program selector.( VCR)PLAYCAMERAOFF//REW PLAY FFZERO SETMEMORYAUDIO DUB.STOPPAUSE SLOW ×2+ /– /RECPAUSE+ , + PLAY(VCR)TAPECAMERATAPE