135E Direct Printing3. Set the camcorder to CARD PLAY (VCR) mode.Wait until the card access indicator stops flashing.4. Connect the camcorder to the printer using the cable.appears and changes to “ ” when the printer is properly connected tothe camcorder. (Does not appear with movies, or still images that cannot be played backwith the camcorder.)❍ If continues to flash (for more than 1 minute), the USB connection mode isnot correctly set in the menu, or the camcorder is not correctly connected to theprinter. In such case, 1) open the menu and make sure that [USB CONNECT] isset to [STANDARD], and 2) disconnect the cable from camcorder and printer, turnoff camcorder and printer, turn both back on and reconnect the camcorder tothe printer.❍ Do not press the CARD STILL/MOVIE button while a printer is connected to thecamcorder.Printing1. During still image playback, select the still imageyou wish to print and press the P.SET button.• The print setting menu appears.• Depending on the printer, the message “Printer warming up”may appear before the camcorder displays the print settingmenu.2. Select the print settings ( 137).3. Select [PRINT] and press the P.SET button.Printing starts. The print setting menu disappears when printing is complete.CARD PLAY (VCR)CARD CAMERAPLAY (VCR)CAMERAPrint P. SETP.SET buttonP.SET button, , , buttons, , , buttons
