73Using the Full Rangeof FeaturesEWind ScreenYou can reduce the wind noise when recording in windy places.Open the menu and select [AUDIO SET UP]. Select [WIND SCREEN], set itto [ON] and close the menu.“WS O” appears when you turn the wind screen on.❍ Low sound may be reduced together with the wind noise. We recommendturning off the wind screen for normal recordings.❍ The wind screen function cannot be turned on/off during recording.❍ The wind screen function can also be used for audio dubbing (when [AUDIODUB.] is set to [MIC. IN] in the [AUDIO SET UP] submenu).❍ The wind screen function cannot be used when an external microphone isconnected to the MIC terminal.Using Headphones during RecordingYou can use headphones to monitor the sound during recording.When using headphones, make sure that “H” is displayed. If “H” is not displayedchange the setting following the procedure below.Switching the AV/Headphones TerminalOpen the menu and select [VCR SET UP]. Select [AV/PHONES], set it to [AV]or [PHONES H ] and close the menu.Adjusting the Headphone VolumeOpen the menu and select [AUDIO SET UP]. Select [ H VOLUME], adjustthe volume with the selector dial and close the menu.You can turn off the volume completely by turning the selector dial down until [OFF]appears. Turn the selector dial up to increase the volume again.CARD PLAY (VCR)CARD CAMERAPLAY (VCR)CAMERACARD PLAY (VCR)CARD CAMERAPLAY (VCR)CAMERACARD PLAY (VCR)CARD CAMERAPLAY (VCR)CAMERAWIND SCREEN••OFFAUDIO SET UP( 41)AV/PHONES••••AVVCR SET UP( 41)HVOLUME•••••AUDIO SET UP( 41)
