88 EditingERecording from Analog VideoDevices (VCR, TV or Camcorder)You can record videos or TV programs from a VCR or analog camcorder on the tape inthe camcorder.❍ Anomalous signals sent from the connected device may be recorded asanomalous picture (although it may not appear so on the screen), or it may notbe recorded at all.❍ You cannot record from tapes with copyright protective signals.❍ Headphones cannot be used during analog line-in recording. If theAV/headphones terminal set to [PHONES H], it will automatically switch to [AV].❍ When connecting to a TV/video with SCART terminal, use a SCART adapterwith input capability (commercially available). The supplied SCART AdapterPC-A10 is for output only.1. Connect the camcorder to the analog video device.See Playing Back on a TV Screen ( 37).2. Set the camcorder to PLAY (VCR) mode and load a blank cassette.3. Connected device: Load the recorded cassette.4. Press the REC PAUSE button.In record pause mode and during recording, you can check thepicture on the screen.5. Connected device: Play back the tape.6. Press the e/a button when the scene you wish torecord appears.7. Press the 3 button to stop recording.• Press the e/ a button to pause recording.• Press the e/ a button again to restart recording.8. Connected device: Stop playback.CARD CAMERACARD CAMERAPLAY (VCR)CAMERA(LINE-IN)RECPAUSE
