94 EditingExample: AV Insert from a VCR1. Connect the camcorder to the VCR.See Playing Back on a TV Screen ( 37).2. VCR: Load a recorded cassette. Locate the scene you wish to insert andpause playback shortly before the scene.3. Set the camcorder to PLAY (VCR) mode and load a recorded cassette.Make sure that the tape-protect switch is set to allow recording.4. Locate the scene you wish to replace and pause playback shortly beforethe scene.You can use the playback buttons on the camcorder or the special playback buttons onthe wireless controller.5. Press the AV INSERT button on the wirelesscontroller.“AV INSERT” and “2a” appear.6. VCR: Play back the tape.7. Press the PAUSE a button on the wireless controllerwhen the scene you wish to insert appears.8. Press the STOP 3 button on the wireless controllerto stop inserting.Press the PAUSE a button on the wireless controller to pauseinserting.9. VCR: Stop playback.Set the zero set memory at the end of the scene you wish to replace. Thecamcorder will automatically stop AV insert at that point.CARD CAMERACARD CAMERAPLAY (VCR)CAMERAEMENUAUDIO DUB.SETAV INSERTPAUSE SLOWREMOTE SET×2AV DVMENUZERO SETMEMORYAUDIO DUB.STOPSETAV INSERTPAUSE SLOW//×2AV DVREW PLAY FFMENURECPAUSEZERO SETMEMORYAUDIO DUB.STOPSETAV INSERTPAUSE SLOW//×2AV DV
